Index > Category List > RF switch

RF switch

RF switch Supplier：成都华光瑞芯微电子股份有限公司成都通量科技有限公司

RF switch Related classification： Analog switch / Special switch / Load switch / Liquid Level Switches / Slide Switches / Keypad Switches / Pressure Switches / Switches /

brief introduction：

RF switch Supplier quotation

View Album

RF switch HG128KC 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG127K2A 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG123KA-3 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG128K2 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG128KB 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG127KC 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG126KB 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG125KA-1(M) 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG125KA-1 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

RF switch HG124K2 成都华光瑞芯微电子股份有限公司 RF switch

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details