Index > Category List > Power divider chip

Power divider chip

Power divider chip Supplier：成都华光瑞芯微电子股份有限公司成都恒利泰科技有限公司成都通量科技有限公司

Power divider chip Related classification： Power supply socket / NOR Gates / XOR Gates / AND Gates / OR Gates / NOT Gates(Inverters) / NAND Gates / Power Management /

brief introduction：

Power divider chip Supplier quotation

View Album

Passive chip, power divider HG127GA 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

Passive chip, power divider HG127G 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

Passive chip, power divider HG126GC 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

Passive chip, power divider HG126GB 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

Passive chip, power divider HG125GB-1 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

Passive chip, power divider HG124G2 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

Passive chip, power divider HG126G3 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

Passive chip, power divider HG126G2 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details
View Album

Passive chip, power divider HG124GA 成都华光瑞芯微电子股份有限公司 Power divider chip

1. The chip is stored in dry and nitrogen environment and used in ultra clean environment; 2. GaAs material is brittle and cannot touch the chip surface. Care must be taken when using it; 3. The chip shall be sintered with conductive adhesive or alloy (the alloy temperature shall not exceed 300 ℃, and the time shall not exceed 30 seconds) to make it fully grounded; 4. The gap between the chip microwave port and the substrate shall not exceed 0.05mm Ф twenty-five μ M double gold wire bonding, Detailed parameters...

Price： 0.00
View details